Comments on: miniDSP miniStack+ (maxiStack?) https://johnr.hifizine.com/2012/06/minidsp-ministack-maxistack/ Technologicality, at work and play Mon, 02 Mar 2020 23:33:22 +0000 hourly 1 https://wordpress.org/?v=4.9.26 By: John Reekie https://johnr.hifizine.com/2012/06/minidsp-ministack-maxistack/#comment-3469 Sat, 16 Mar 2013 08:57:30 +0000 http://johnr.hifizine.com/?p=80#comment-3469 Hi Adam, I used the 17V supply that I had on hand and which was shown in some photos in the miniStack article. I’ve subsequently purchased a 24V SMPS from connexelectronic, which will enable full power output, but unfortunately no progress on putting it all together yet.

The key point to note with this configuration is that you must connect BOTH miniAMPs to the power supply – this is to avoid a lot of current flowing along the jumper connectors.

Just the miniDSP with the two miniAMPs should be fine, the miniDIGI is only for digital input.

]]> By: adam https://johnr.hifizine.com/2012/06/minidsp-ministack-maxistack/#comment-3466 Sat, 16 Mar 2013 07:13:29 +0000 http://johnr.hifizine.com/?p=80#comment-3466 am thinking of the very same for a small active speaker setup.

what power source did you use for both the amps? read in your other article that any 12 – 24 v powersource can be used with 1 miniamp module. is it the same for 2?
I will be using just the minidsp module connected to the 2 mini amps.

thanks

]]>